Working at height toolbox talk
A free, ready-to-use working at height toolbox talk. It covers the three steps to follow before anyone works at height, the controls and precautions to brief, questions to ask your team, and a sign-off sheet to record who attended.
What the working at height toolbox talk covers
Falls from height are one of the biggest causes of deaths and major injuries at work. Most people picture roofs and scaffolding, but plenty of falls happen from stepladders, through fragile surfaces, or while someone is stacking a high shelf or changing a light bulb.
The PDF is three pages (TBT039, version 3/2025) and takes 10 to 15 minutes to deliver. It includes:
- Why working at height causes so many serious injuries
- The three steps to consider before work at height is allowed
- Control measures for managers and precautions for workers
- Five questions to check understanding
- A confirmation sheet for names, signatures and dates
The three steps before anyone works at height
The Work at Height Regulations 2005 set an order of priority, and the toolbox talk follows it:
- Avoid working at height where you can. Assemble items at ground level and lift them into place, or use tools on extension poles.
- Prevent falls where the work can’t be avoided, using the right access equipment or a protected area such as a platform with guard rails.
- Reduce the distance and consequences of a fall if the risk can’t be removed, for example with a harness and lanyard.
Each step down the list relies more on people getting it right, so only move down when the step above isn’t reasonably practicable.
Working at height control measures and precautions
For managers and supervisors
- Don’t plan work at height if the job can be done on the ground and lifted into place.
- Assess the risks and plan the job before it starts.
- Make sure workers are trained for the task and know the risks and controls.
- Check the right equipment is being used, the area is safe, and everything is inspected before use.
- For specialist equipment, check statutory inspections and training certificates are in date.
For workers
- If you haven’t been trained for the job, speak to your manager before you start.
- Check harnesses, lanyards, tool lanyards and hard hats before each use, and know what a defect looks like.
- Report damaged equipment, fall risks and anything that could be dropped on people below.
- If a task needs two people, ask for help rather than managing on your own.
Questions to ask your team
Finish the talk with these questions from the PDF. If people struggle with an answer, go over that part again.
- What counts as working at height?
- When should you report something that could injure you or someone else?
- Who do you report a problem to?
- What should you do if equipment looks inadequate or in poor condition?
- When should your equipment be inspected?
How to deliver this toolbox talk on site
Run it where the work happens, and point at the actual ladders, towers and edges as you go. Brief your own procedures alongside the PDF: who inspects access equipment and how often, whether the job needs a permit, and what training people need before they use each type of equipment.
Then ask everyone to sign the confirmation sheet on page three and file it with your training records. A toolbox talk is a reminder, not a substitute for training, so anyone who plans, supervises or does work at height still needs to be competent for it. See our working at height training, or the SSSTS course for site supervisors.
Download the working at height toolbox talk PDF
Free to print and use with your team. It includes the questions above and a confirmation sheet for signatures.
Training and support for this topic
Working at height training
Courses for staff who use ladders, stepladders and other access equipment.
SSSTS for site supervisors
The CITB Site Supervisor Safety Training Scheme for people who plan and check work.
A new talk every month
Hassle Free construction customers get a new toolbox talk every month.
Trusted by organisations across the South West
Need help with working at height safety?
Our consultants can review your risk assessments and safe systems of work, and our trainers run courses at our Warmley centre between Bristol and Bath or at your premises. Call 0117 958 2070 or email [email protected].